The 3600W, 4200W, and 6200W All-In-One Inverter Charger combines a pure sine wave inverter, advanced battery charger, and intelligent solar charge controller into a single compact unit. Designed for residential, commercial, and off-grid energy systems, it provides efficient power conversion, reliable backup power, and seamless energy management for a wide range of applications.
| GRID-TIE OPERATION | |||
|---|---|---|---|
| PV INPUT (DC) | |||
| Nominal DC Voltage / Maximum DC Voltage | 360/500VDC | ||
| Start-up Voltage / Initial Feeding Voltage | 60VDC/90VDC | ||
| MPPT Voltage Range | 60-450VDC | ||
| Maximum Input Current | 1/18A | 1/22A | |
| GRID OUTPUT (AC) | |||
| Nominal Output Voltage | 220/230/240VAC | ||
| Output Voltage Range | 195-253VAC | ||
| Nominal Output Current | 15.7A | 18.2A | 27.0A |
| Power Factor | >0.99 | ||
| EFFICIENCY | |||
| Maximum Conversion Efficiency (DC/AC) | 98% | ||
| TWO LOAD OUTPUT POWER | |||
| Full Load | 3600W | 4200W | 6200W |
| Maximum Main Load | 3600W | 4200W | 6200W |
| Maximum Second Load (battery mode) | 1200W | 1400W | 2067W |
| Maximum Load Cut Off Voltage | 26VDC | 26VDC | 52VDC |
| Maximum Load Return Voltage | 27VDC | 27VDC | 54VDC |
| OFF-GRID OPERATION | |||
| AC INPUT | |||
| AC Start-up Voltage / Auto Restart Voltage | 120-140VAC/180VAC | ||
| Acceptable Input Voltage Range | 90-280VAC OR 170-280VAC | ||
| Frequency Range | 59-61±1HZ | ||
| Maximum AC Input Current | 21.1A | 24.7A | 38.4A |
| PV INPUT (DC) | |||
| Nominal DC Voltage / Maximum DC Voltage | 360/500VDC | ||
| MPPT Voltage Range | 60-450VDC | ||
| Maximum Input Current | 1/18A | 1/22A | |
| BATTERY MODE OUTPUT (AC) | |||
| Nominal Output Voltage | 220/230/240VAC | ||
| Output Waveform | Pure Sine Wave | ||
| Efficiency (DC to AC) | 94% | ||
| BATTERY & CHARGER | |||
| Nominal DC Voltage | 24VDC | 48VDC | |
| Maximum Solar Charging Current | 120A | ||
| Maximum AC Charging Current | 100A | ||
| Maximum Solar+AC Charging Current | 120A | ||
| HYBRID OPERATION | |||
| PV INPUT (DC) | |||
| Nominal DC Voltage / Maximum DC Voltage | 360/500VDC | ||
| Start-up Voltage / Initial Feeding Voltage | 90VDC/120VDC | ||
| MPPT Voltage Range | 60-450VDC | ||
| Maximum Input Current | 1/18A | 1/22A | |
| GRID OUTPUT (AC) | |||
| Nominal Output Voltage | 220/230/240VAC | ||
| Output Voltage Range | 195-253VAC | ||
| Nominal Output Current | 15.7A | 18.2A | 27.0A |
| AC INPUT | |||
| AC Start-up Voltage / Auto Restart Voltage | 120-140VAC/180VAC | ||
| Acceptable Input Voltage Range | 90-280VAC OR 170-280VAC | ||
| Maximum AC Input Current | 21.1A | 24.7A | 36.4A |
| Maximum AC Charging Current | 100A | ||
| GENERAL | |||
| PHYSICAL | |||
| Dimension, D*W*H (mm) | 420*350*110 | ||
| Carton Dimension, D*W*H (mm) | 500*415*180 | ||
| Net Weight (kgs) | 8 | 8 | 8.9 |
| Gross Weight (kgs) | 9 | 9 | 10 |
| INTERFACE | |||
| Communication Port | RS232/RS485/WIFI/GPRS/LITHIUM BATTERY | ||
| ENVIRONMENT | |||
| Humidity | 5% to 95% Relative Humidity (Non-condensing) | ||
| Operating Temperature | -10°C-50°C | ||
| STANDARD | |||
| Compliance Safety | CE | ||
An all-in-one inverter combines an inverter, solar charge controller, and battery charger into a single unit, allowing it to manage solar input, convert DC power to AC power, and charge batteries from solar panels or the grid. This design simplifies installation and reduces wiring complexity while offering integrated protection features and smart system management.
Most all-in-one inverters support battery-less operation, meaning they can run directly from solar power or grid power as long as the solar array or AC input can provide enough energy. However, using batteries ensures stable output, reduces power interruptions, and allows the system to run during nighttime or grid outages.
Yes, the inverter typically supports multiple battery chemistries, including LiFePO₄, AGM, GEL, sealed lead-acid, and flooded batteries. You only need to select the correct battery type in the settings so the charging parameters match your battery’s requirements for voltage, absorption, and float stages.
Yes, the inverter is designed to manage multiple power sources simultaneously. It can prioritize solar energy during the day, charge batteries when needed, and automatically switch to grid power if solar production is insufficient. This ensures continuous operation and optimized energy use without manual switching.
The inverter provides pure sine wave AC output, which is safe for sensitive electronics such as refrigerators, TVs, computers, pumps, and power tools. As long as the combined load stays within the inverter’s rated output power, the system will run appliances smoothly without voltage drops or flickering.
You can connect solar panels as long as the total voltage and power remain within the inverter’s solar charge controller limits. Panels are typically wired in series to reach the recommended PV voltage, and the inverter will automatically regulate charging. You should check the Voc rating of your array to ensure it does not exceed the inverter’s maximum PV input.
Routine maintenance is minimal and usually involves ensuring proper ventilation, checking cable connections for tightness, keeping the unit clean from dust, and monitoring system performance through the built-in screen or app. With proper installation, the inverter can operate reliably for many years without major servicing.
Connect directly with our factory to obtain the best packaged price for solar panels and LiFePO4 battery packs, as well as OEM manufacturing lead times.
We offer leading solar panels and long-life lithium battery. Start your renewable energy journey and get a one-stop pv energy storage solution today!
